Publications and PhDs

Supervised PHDs

  

Impact Response of Composite Helicopter Rotor Blades, W.W.Turnock, 2004


Pencilling: A Novel Behind Armour Blunt Trauma Injury, E.A.Lewis, 2005


Ballistic Impact on Composite Armour, P.Bourke, 2007


Behind Armour Blunt Trauma: The Development of a Thoracic and Abdominal Simulator Rig, K.J.E.Hewins 2010


Ergonomics, Design and reliability of Body Armour, C.H.Watson, 2010


Adequacy of Test Standards in Evaluating Blast Overpressure (BOP) Protection for the Torso, T.Whyte, 2016


A gun based test method to simulate mine blast against boots, R.K.Pinto, 2016


Partitioning of Shallow Buried Near-Field Blast, J.D.Reinecke, 2018 

Full Publications List

image21

Articles in Journals

1.  Rabbitt, A., Horsfall, I. and Carr, D. J. (2019) Effect of ballistic impacts on batteries and the potential for injury, Journal of the Royal Army Medical Corps, British Medical Journal Publishing Group, p. jramc-2018-001113 [Online]. DOI: 10.1136/jramc-2018-001113 

2. Fenton L A, Horsfall I & Carr DJ (2018) Skin and skin simulants, Australian Journal of Forensic Sciences (online) 1-11.

3. Carr D, Lewis E & Horsfall I (2017) A systematic review of military head injuries, Journal- Royal Army Medical Corps, 163 (1) 13-19.

4. Macoveciuc I, Marquez-Grant N, Horsfall I & Zioupos P (2017) Sharp and blunt force trauma concealment by thermal alteration in homicides: an in-vitro experiment for methodology and protocol development in forensic anthropological analysis of burnt bones, Forensic Science International, 275 260-271.

5. Judge R, Yang Z, Jones SW, Beattie G & Horsfall I (2017) Spiral strand cables subjected to high velocity fragment impact, International Journal of Impact Engineering, 107 58-79.

6. Carr DJ, Horsfall I & Malbon C (2016) Is behind armour blunt trauma a real threat to users of body armour? A systematic review, Journal of the Royal Army Medical Corps, 162 8–11

7. Cowper EJ, Carr DJ, Horsfall I, Fergusson SM, (2015) The effect of fabric and stabbing variables on severance appearance, Forensic Science International 249 214–224

8. Carr DJ, Lindstrom A-C, Jareborg A, Champion SM, Waddell N, Miller D, Teagle M, Horsfall I & Kieser J (2015) Development of a skull/brain model for military wound ballistics studies, International Journal of Legal Medicine, 129 (3) 505-510.

9. Helliker M, Carr DJ, Lankester C, Fenton L, Girvan L & Horsfall I (2014) Effect of domestic laundering on the fragment protective performance of fabrics used in personal protection, Textile Research Journal, 84 (12) 1298-1306. 

10. Carr DJ, Starling G, de Wilton T & Horsfall I (2014) Tensile properties of military chin-strap webbing, Textile Research Journal, 84 (6) 655-661. 

11. Leevers PS, Horsfall I, Rager A, Major Z, Moore DR, Pavan A & Williams JG (2014) High Rate Fracture Toughness of Thermoplastics, Polymer Testing, 33 (February) 79-97. 

12. Kieser D, Carr D, Leclair S, Horsfall I, Theis J, Swain M & Kieser J (2013) Clothing increases the risk of indirect ballistic fractures, Journal of Orthopaedic Surgery and Research, 8 (1). 

13. Kieser DC, Carr DJ, Leclair SCJ, Horsfall I, Theis JC, Swain MV & Kieser JA, (2013) Remote ballistic fractures in a gelatine model - aetiology and surgical implications, Journal of Orthopaedic Surgery and Research, 8 (15). 

14. Agnelli S & Horsfall I (2013) Causes of scatter in high rate fracture testing of polymers, Engineering Fracture Mechanics, 101 59-66. 

15. Kieser, DC, Carr DJ, Leclair SCJ, Horsfall I, Theis JC, Swain MV & Kieser JA (2013) Gunshot induced indirect femoral fracture: mechanism of injury and fracture morphology, Journal of the Royal Army Medical Corps, 159 294-299. 

16. Knock C, Horsfall I & Champion SM (2013) Effect of core size and ground surface on debris fields of failed electric bushings, Electric Power Systems Research, 104 104-109. 

17. Knock C, Horsfall I & Champion SM (2013) Development of a computer model to predict risks from an electrical bushing failure, Electric Power Systems Research, 103 86-91. 

18. Kieser DC, Carr DJ, Girvan L, Leclair SCJ, Horsfall I, Theis JC, Swain MV & Kieser JA (2013) Identifying the source of bullet wipe - a randomised blind trial, International Journal of Legal Medicine, 127 (5) 951-955. 

19. Horsfall I, Watson CH & Champion SM (2013) Optimizing the stacking sequence in dual-purpose body armours, Journal of Applied Mechanics : Transactions of ASME, 80 (3), 031901-1-031901-5

20. Hussain G, Hameed A, Horsfall I, Barton P & Malik AQ (2012) Experimental and simulation optimization analysis of the Whipple shields against shaped charge, Acta Mechanica Sinica, 28 (3) 877-884. 

21. Sakaguchi S, Carr DJ, Horsfall I & Girvan E (2012) Protecting the extremities of military personnel: fragment protective performance of one- and two-layer ensembles, Textile Research Journal, 82 1295-1303. 

22. Breeze M J, Watson C H, Horsfall I & Clasper C J (2011) Comparing the comfort and potential military performance restriction of neck collars from the body armour of six different countries, Military Medicine, 176 (11) 1274-1277. 

23. Breeze J, Horsfall I, Hepper A & Clasper J (2011) Face, neck, and eye protection: adapting body armour to counter the changing patterns of injuries on the battlefield, British Journal of Oral & Maxillofacial Surgery, 49 (8) 602-606. 

24. Horsfall I, Hansen BI & Carr DJ (2011) Security of bolted joints during explosive loading, International Journal of Vehicle Structures and Systems, 3 (2) 107-112. 

25. Watson C H, Bates L & Horsfall I (2011) The effect of low angle yaw on the armour penetration of light armour piercing projectiles, Journal of Battlefield Technology, 13 (3) 1-7. 

26. Horsfall I & Carr D (2011) Last line of defence, Materials World, 19 (4) 27-28. 

27. Sullivan A, Derry C, Robson JD, Horsfall I & Prangnell PB (2011) Microstructure simulation and ballistic behaviour of weld zones in friction stir welds in high strength aluminium 7xxx plate, Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing, 528 (9) 3409-3422. 

28. Horsfall I, Edwards MR & Hallas MJ (2010) Ballistic and physical properties of highly fractured alumina, Advances in Applied Ceramics, 109 (8) 498-503. 

29. Breeze J, Horsfall I, Hepper A (2010) Face and neck protection – adapting body armour to counter the changing patterns of battlefield injury, British Journal of Oral and Maxillofacial Surgery, 48 (Supplement 1), pP.S51

30. Horsfall I, Watson CH, Champion SM, Prosser P & Ringrose TJ (2005) The Effect of Knife Handle Shape on Stabbing Performance, Applied Ergonomics, 36 (4) 505-511. 

31. Horsfall I, Champion SM & Watson CH (2005) The Development of a Quantitative Flexibility Test for Body Armour and Comparison with Wearer Trials, Applied Ergonomics, 36 (3) 283-292. 

32. Knock C, Horsfall I, Champion SM & Harrod IC (2004) The Bounce and Roll of Masonry Debris, International Journal of Impact Engineering, 30 (1) 1-16. 

33. Horsfall I (2003) Armour for war and peace, Defence Procurement Analysis - Supplement Armour and Attack of Armour, pp. 30-32.

34. Horsfall I, Bishop W & Cowan D (2003) The Effect of Ceramic Type on the Performance of Ceramic-Faced Metallic Armour, Journal of Battlefield Technology, 6 (3) 1-4. 

35. Bleetman A, Watson CH, Horsfall I & Champion SM (2003) Wounding Patterns and Human Performance in Knife Attacks: optimising the protection provided by knife-resistant body armour., Journal of Clinical Forensic Medicine, 10 (4) 243-248. 

36. Horsfall I, Ehsan N & Bishop W (2000) A comparison of the performance of various light armour piercing ammunition, Journal of Battlefield Technology, 3 (3) 5-8.

37. Horsfall I, Austin S J & Bishop W (2000) Structural ballistic armour for transport aircraft, Materials and Design, 21 (1) 19-25. 

38. Horsfall I, Prosser P D, Watson C H & Champion S M (1999) An assessment of human performance in stabbing., Forensic Science International, 102 (2-3) 79-89. 

39. Horsfall I (1998) Ceramic armour materials for AFVs, Defence Procurement Analysis, 21-23.

40. Horsfall I & Buckley D (1996) The effect of through-thickness cracks on the ballistic performance of ceramic armour systems, International Journal of Impact Engineering, 18 (3) 309-318. 

41. Horsfall I, Friend CM & Burrows CL (1991) The effect of particulate:fibre ratio on the properties of short-fibre/particulate hybrid MMC produced by preform infiltration, J. Materials Science, 26 (1) 225-231. 

42. Clegg WJ, Horsfall I, Mason JF & Edwards L (1988) The tensile deformation and fracture of Al-"Saffil" metal-matrix composites, Acta Metallurgica, 36 (8) 2151-2159. 

Conference Proceedings

1. Wirth, S. G., Morrow, I. L. and Horsfall, I. (2018) ‘Fabrication procedure and performance of 3D printed X-band horn antenna’, Loughborough Antennas & Propagation Conference 2018 (LAPC 2018), Institution of Engineering and Technology [Online]. DOI: 10.1049/cp.2018.1481. 

2. Wirth, S. G., Morrow, I. L. and Horsfall, I. (2018) ‘Near-Field Microwave Imaging using a Polarimetric Array of 3D Printed Antennas and Lenses’, Loughborough Antennas & Propagation Conference 2018 (LAPC 2018), Institution of Engineering and Technology [Online]. DOI: 10.1049/cp.2018.1486.

3. Malbon C, O’Rourke S, Horsfall I (2017) Comparison of the DM11A1B2 9mm Luger FMJ Bullet from Two Different Manufacturers, 30th International Symposium on Ballistics, Lancaster.

4. Franceskides C, Arnold E, Horsfall I, Tozzi G & Zioupos P (2017) A subject-specific analogue model for spinal motion segments. In: 23rd Congress of the European Society of Biomechanics, Seville.

5. Franceskides C, Arnold E, Horsfall I, Clasper J, Tozzi G & Zioupos P (2017) 3D printing, the future of cost effective biomechanical testing. In: SAFE Europe Symposium 2017, Amsterdam.

6. Franceskides C, Leger T, Horsfall I, Shanker T, Adams GJ , Clasper J & Zioupos P (2016) Evaluation of bone excision on occipital area of simulated human skull. In: 22nd Congress of the European Society of Biomechanics (ESB 2016), Lyon.

7. Darrock L, Manning A, Caine J, Beadle J, Peare A & Horsfall I (2016) Pre-stressed plates as a mechanism to provide additional under belly blast protection. In: 29th International Symposium on Ballistics, Edinburgh.

8. Bokhari D, Teagle M & Horsfall I (2016) Terminal ballistics of 7.62 mm armour piercing projectiles against spaced, oblique RHA plates. In: 29th International Symposium on Ballistics, Edinburgh.

9. Harington B, Peare A & Horsfall I (2016) The Study of a Human Head Simulant's Dynamic Response to a Blast Wave. In: 29th International Symposium on Ballistics, Edinburgh.

10. Horsfall I (2016) The Role of Camouflage in Modern Battlefield Survivability, Advances in Camouflage Science and Engineering, IOM3, London.  

11. Reinecke JD, Beetge FJ. Horsfall I & Miyambo M (2015) Partitioning of a scaled shallow-buried near-field blast load.. In: 30th International Symposium on Shock Wave, Tel Aviv.

12. Carr DJ, Lindstrom A, Jareborg A, Champion S, Waddell JN, Miller D, Teagle M, Horsfall I & Kieser J (2014) Development of a skull / brain model for ballistic testing. In: 28th International Symposium on Ballistics, Atlanta.

13. Pinto, R, Horsfall I (2014) Ballistic Simulation of Loading and Injury Patterns Produced by a Blast Test and Evaluation of Contamination, In: 28th International Symposium on Ballistics, Atlanta.

14. Horsfall I & McCamphill-Rose PJ (2013) The Development of Launch Methods for High Velocity Fragment Simulating Projectiles. In: 27th International Symposium on Ballistics, Freiburg, pp. 1954-1965

15. Horsfall I, Pinto R, Nicol D, (2012) Testing of Mine Protection Boots, Advances in Protective Clothing, IOM3, Farnborough.

16. Helliker M, Carr DJ, Lankester C, Fenton L & Horsfall I (2012) Effect of laundering on the fragment protective performance of a single jersey knit silk used in personal protection. In: Personal Armour Systems Symposium (PASS) 2012, Nuremburg.

17. Horsfall I & Arnold MR (2010) Protecting from Slash Knife Attacks. In: Proc Textile Institute Centenary Conference, Manchester.

18. Whyte T,  Horsfall I (2010) The development of a South African Torso Surrogate (SATS) to explore contradictions in personal protective equipment (PPE) test standards and methodologies regarding primary blast overpressure injuries, In: PASS (Personal Armour Systems Symposium) 2010, Quebec.

19. Watson CH, Horsfall I & Fenne P (2010) Ergonomics of Body Armour. In: PASS (Personal Armour Systems Symposium) 2010, Quebec.

20. Hameed A, Couldrick C, Hazell P, Horsfall I, Dowling S, Zagorecki A, Goyder h, Knock C & Hetherington J (2009) Current research work and facilities of Cramfield university at the defence academy of the United Kingdom, In; Proc 60th meeting of the aeroballistic range association, Baltimore 

21. Horsfall I, Ringrose T & Watson CH (2008) A statistical approach to proof testing. In: PASS (Personal Armour Systems Symposium) 2008, Brussels,

22. Watson CH, Parker F, Horsfall I & Fenne P (2008) Feasibility of using damage to body armour as evidence to prove the degree of intent of wounding. In: PASS (Personal Armour Systems Symposium) 2008, Brussels.

23. Watson CH, Webb A & Horsfall I (2008) Assessment and Measurement of Potential Blunt Trauma Under Ballistic Helmets. In: Bless S, Walker J (eds.), Proceedings of the 24th International Symposium on Ballistics, New Orleans, pp. 448-455

24. Hewins K, Horsfall I & Watson C (2008) The Validation of a Thoracic and Abdominal Test Rig for Soft Body Armour Testing, In: Bless S, Walker J (eds.), Proceedings of the 24th International Symposium on Ballistics, New Orleans, pp. 1253-1259

25. Horsfall I, Petrou E & Champion SM (2007) Shaped Charge Attack of Spaced and Composite Armour. In: Galvez F, Sanchez-Galvez V (eds.), 23rd International Symposium on Ballistics, Tarragona, pp.1281-1288

26. Horsfall I, Watson CH & Boswell C (2007) Residual strength of composites after ballistic impact. In: Galvez F, Sanchez-Galvez V (eds.), 23rd International Symposium on Ballistics, Tarragona, pp. 1289-1296

27. Watson CH, Ringrose T, Champion SM, Horsfall I & B Mallon B (2007) The effect of cracks on the ballistic performance of contoured protective body armour plates.. In: Galvez F, Sanchez-Galvez V (eds.), 23rd International Symposium on Ballistics, Tarragona, pp.1347-1354

28. Bourke P & Horsfall I (2006) Indentation Response of Fibre Reinforced Composite Laminates. In: Gdoutos EE (ed.), Fracture of Nano and Engineering Materials and Structures Proceedings of the 16th European Conference of Fracture, Alexandroupolis. pp. 331-232

29. Horsfall I, Watson CH, Champion SM, (2006) The biomechanics of stab resistant armour, I. Journal of Biomechanics, 39 (Supplement 1), pp. S162

30. Horsfall I & Shattock J (2005) The effect of spaced armour on the penetration of shaped charge warheads. In: Flis W, Scott B (eds.), Proc 22nd International Symposium on Ballistics, Vancouver pp. 941-947 

31. Lewis EA, Horsfall I, Watson CH (2005) Pencilling: A novel behind armour blunt trauma injury, In: Flis W, Scott B (eds.), Proc 22nd International Symposium on Ballistics, Vancouver pp.1326-1332 

32. Watson CH, Lewis E, Horsfall I, Johnson P, Bleetman A, Bir C, Wilhelm M, Sherman D, Eck J & Waliko (2004) An Investigation to Confirm the Existence of 'Pencilling' as a Non-penetrating Behind Armour Injury. In: PASS (Personal Armour Systems Symposium) 2004, The Hague, The Netherlands.

33. Watson CH, Horsfall I & Luk E (2004) An evaluation of the hypodermic needle threat against body armour. In: PASS (Personal Armour Systems Symposium) 2004, The Hague, Netherlands.

34. Watson CH, Lewis E & Horsfall I (2004) Behind Armour Blunt Trauma Effects after Low Level Velocity Ballistic Impact. In: Procs 21st Symposium on Ballistics, Adelaide, Australia.

35. Horsfall I & Turnock W (2003) Impact damage behaviour of composite rotor blade structures. In: Proc 48th Int. SAMPE Technical Conference, Dayton.

36. Lewis EA, Horsfall I & Watson CH (2003) Behind Armour Blunt Trauma Effects after Low Level Velocity Ballistic Impact, In: Proc 54th Meeting of the Aeroballistic Range Association, New Mexico.

37. Horsfall I, Watson CH & Chilese CG (2003) A Drop Tower Method for High Rate Fracture Toughness Testing of Polymers. In: Blackman BRK, Pavan, AS, Williams JG (eds.), European Structural Integrity Society, Elsevier, 32, pp. 221-229, 

38. Watson CH, Horsfall I, Champion SM & Harrod IC (2002) Blade Sharpness and its Effect on the Testing of Body Armours. In: PASS (Personal Armour Systems Symposium) 2002, The Hague.

39. Lewis EA, Horsfall I & Watson CH (2002) A comparison of the behind armour blunt trauma effects between ceramic faced and soft body armours caused by ballistic impact. In: PASS (Personal Armour Systems Symposium) 2002, The Hague.

40. Horsfall I, Champion SM, Wong W & Watson CH (2001) The effect of matrix type on the ballistic and mechanical performance of E-glass composite armour. In: 19th International Symposium on Ballistics, Interlaken, Switzerland.

41. Horsfall I (2001) Glass ceramic armour systems for light armour applications. In: 19th International Symposium on Ballistics, Interlaken, Switzerland.

42. Champion SM, Robertson AM, Horsfall I, Watson CH (2000) Stacking sequence effects on ballistic performance of dual purpose armour, Proc Personal Armour Systems Symposium 2000, Defence Clothing and Textiles Agency, Colchester.

43. Horsfall I, Watson CH, Champion SM (2000) Human performance in slashing attack, Proc Personal Armour Systems Symposium 2000, Defence Clothing and Textiles Agency, Colchester.

44. Catmur DA, Edwards MR, Horsfall I & Nitsch RMB (1999) The effect of confinement on the performance of ceramic faced armour against shaped charge attack, In: Reinecke W (ed.), Proc 18th International Symposium on Ballistics, Texas. pp. 731-738

44. Horsfall I, Edwards MR & Hallas MJ (1999) The ballistic performance of comminuted ceramic against armour piercing shot, In: Reinecke W (ed.), Proc 18th International Symposium on Ballistics, Texas, pp. 939-945

46. Horsfall I, Iremonger MJ, Lumley RV, (1996) Projectile Penetration through comminuted ceramic, Presented at 17th International Symposium on Ballistics, San Francisco.

47. Horsfall I, Pollitt SM, Belk JA & Angood C (1995) Impact Perforation Testing of Stab Resistant Armour Materials, In: Williams JG,Pavan A (eds.) Impact and Dynamic Fracture of Polymers and Composites, ESIS 19, pp.433-442.

48. Horsfall I, Downing M & Rogers KD. (1994) The interaction of alumina fibres with titanium aluminide matrices. In: ACS 96th Annual Meeting, Indianapolis.

49. Downing M & Horsfall I. (1994) Fabrication of fibre reinforced nickel aluminide matrix composites by reactive processing. In: ACS 96th Annual Meeting, Indianapolis.

50. Horsfall I, Rogers KD & Jones RW. (1994) Structure-Property Relationships of Glass Ceramic Materials Used in Ballistic Armour Applications In: Proc ACS 96th Annual Meeting, Indianapolis.

51. Horsfall I, Downing M & Rogers KD. (1994) The interaction of alumina fibres with titanium aluminide matrices. In: Ceramic Transactions, 46, pp. 611-620, (1994).

52. Horsfall I & Downing M. (1994) Fabrication of Titanium and Nickel Aluminide matrix composites by reactive processing. In: In situ Composites: Science and Technology, Pittsburgh PA, pp. 149-157.

53. Horsfall I & Cundy SJ. (1992) A process for the fabrication of ceramic fibre reinforced titanium aluminide. In: 16th Annual Conference on Composites and Advanced Ceramic Materials, Cocoa Beach, Florida.

54. Horsfall I, Rouse JF & El-Kheir J. (1990) The degradation of optical fibres despooling through missile motor effluxes, Proc EMFOC/LAN 90, Munich.

55. Friend CM, Horsfall I & Burrows CL. (1989) The fabrication of short fibre/particulate hybrid MMC by the squeeze casting route, Proc BNF 7th International Conference, Oxford.

56. Friend C, Young R & Horsfall I. (1989) Heat-Treatment Effects in δ -Alumina Fibre Reinforced Aluminium Alloy 6061, ECCM3, Developments in the Science and Technology of Composite Materials, Bordeaux ASM International Detroit pp. 227-232

57. Friend CM, HorsfalI, Luxton SD & Young RJ (1988) The Effect of Fibre/Matrix Interfaces on the Age-Hardening Characteristics of a-Alumina Fibre Reinforced AA6061, In: Fishman SG, Dhingra AK (eds.), 1988 World materials Congress Proceeding, Chicago, ASM International Detroit,  pp. 308-312 

58. Dinwoodie J & Horsfall I. (1987) New Developments with Short Staple Alumina Fibres in Metal Matrix Composites, Proc ECCM VI / EACM ll, London

59. Clegg WJ, Horsfall I, Mason JF & Briscoe NA. (1987) A Microstructural Study of Aluminium-Delta Alumina Composites, Proc 22nd Annual conference of the Microbeam Society, Hawaii. 

60. Clegg WJ, Horsfall I & Mason JF. (1985) Tensile Deformation of Delta Alumina Based Composites, Proc EACM I, Bordeaux.

Unpublished Conference Papers

  

1. Horsfall I & Kolcjak R, (2004) Optimisation of damage tolerance in composite rotor blade materials, Fifth International Symposium on Impact Engineering, Cambridge.

2. Horsfall, I Rager A, Major Z, Moore DR, Pavan A &Williams JG (2004)High rate fracture toughness testing of polymers, Fifth International Symposium on Impact Engineering, Cambridge.

3. Horsfall I, Watson CH & Clarke K (2003) High rate tensile testing of automotive body steels, Presented at Prospects in Fracture, Imperial College, London. 

4. Horsfall I (2003) Novel Materials for mine blast protection of AFVs, Proc XII European AFV Attack and Survivability Symposium, Shrivenham, 2003.

5. Horsfall I (2002) Technology for ballistic and stab protection, Proc Designing equipment for body protection, IMechE, London.

6. Horsfall I, Watson CH, Sim D (2000) Human generated impact, Proc’ of the Society of Environmental Engineers Convention 2000 - Shock and Impact Testing, Farnborough.

7. Horsfall I, Watson CH (1999) Indentation behaviour of polymeric materials under dynamic and static conditions, Presented at 2nd ESIS Conference on Polymers and Composites - Fracture of Polymers, Composites and Adhesives, Les Diablerets. 

8. Horsfall I, Boswell C (1999) The structural integrity of composite panels in compression after ballistic impact, Presented at 2nd ESIS Conference on Polymers and Composites - Fracture of Polymers, Composites and Adhesives, Les Diablerets. 

9. Horsfall I, Watson CH, Aldridge MJ (1999) A dynamic version of the Boeing wedge test, Presented at 2nd ESIS Conference on Polymers and Composites - Fracture of Polymers, Composites and Adhesives, Les Diablerets.

10. Horsfall I, Ehsan N, Bishop W (1999) A comparison of the performance of various light armour piercing ammunition, Proc Light Armour Systems Symposium, Cranfield University, Shrivenham.

11. Horsfall I, Champion SM, Harrod IC (1999) Drop tube development, Proc Sharp Weapons Armour Technology Symposium, Cranfield University, Shrivenham.

12. Watson CH, Horsfall I & Robinson AM (1999) Stacking sequence effects in multi-purpose body armour, Proc Sharp Weapons Armour Technology Symposium, Cranfield University, Shrivenham.

13. Horsfall I, Harrod IC & Watson CH (1999) Knife tip sharpness and its measurement, Proc Sharp Weapons Armour Technology Symposium, Cranfield University, Shrivenham.

14. Horsfall I, Watson CH, Champion, Harrod IC (1997) Stab Resistant Body Armour, Proc Light Armour Systems Symposium, Shrivenham.

15. Horsfall I, Bishop W & Cowan WD (1997) Up-armouring Systems for Light armoured Vehicles, Proc. Light Armour Systems Symposium, Shrivenham.

16. Horsfall I, Turnbull R (1995) Performance Measurement of Ceramic Materials for Composite Armour Systems, In: Proc Light Armour Systems Symposium, Shrivenham.

17. Horsfall I & Buckley D. (1995) Multi-hit Capability and Damage Tolerance of Ceramic Faced Armour Systems, In: Proc Light Armour Systems Symposium, Shrivenham

18. Horsfall I, (1992) Fibre reinforced Titanium Aluminides, Presented at Gordon Research Conference on Solid State Studies in Ceramics, Tilton NH.